130mm ultra-thin Exposed Chilled-water Fan Coil Unit

Model:

YG-30

YG-20

YG-10

Quantity:

Contact Now

YG-10 / YG-20 / YG-30

Product Advantage：

Efficient energy saving
Quiet operation
Ultra-slim space-saving design
Flexible speed adjustment
Easy maintenance
Strong environmental adaptability
Intelligent control
Convenient installation

This is our new improved ultra-thin exposed fan coil unit, only13cm thickness, but at the same time ensured the good performance of the cooling and heating.

What's more, the kind of ultra-thin fan coil unit have the low noise and can be ceiling suspended, wall mounted or floor standing, which is suitable for residential use, office, hotel or other occasion.

Model NO.	YG-10					YG-20					YG-30
Fan speed	1200	1400	1600	1800	2000	1200	1400	1600	1800	2000	1200	1400	1600	1800	2000
Air flow	265	300	340	370	400	265	300	340	370	400	265	300	340	370	400
Power Input	14	19	26	32	35	14	19	26	32	35	14	19	26	32	35
Noise	34	38	42	46	48	34	38	42	46	48	34	38	42	46	48
Cooling Cap. (7℃)	0.9	1.1	1.25	1.35	1.4	0.9	1.1	1.25	1.35	1.4	0.9	1.1	1.25	1.35	1.4
Heating Cap. (45℃）	0.99	1.2	1.38	1.4	1.45	0.99	1.2	1.38	1.4	1.45	0.99	1.2	1.38	1.4	1.45
Heating Cap. (60℃)	1.56	1.87	2.12	2.3	2.38	1.56	1.87	2.12	2.3	2.38	1.56	1.87	2.12	2.3	2.38
Water flow	0.2	0.23	0.26	0.29	0.32	0.2	0.23	0.26	0.29	0.32	0.2	0.23	0.26	0.29	0.32
Water pressure drop	12	12	14	15	16	12	12	14	15	16	12	12	14	15	16

130mm Ultra-thin Exposed fan coil unit Installation instruction:

Keep the four lifting points of the unit at the same level when installing it horizontally to ensure the machine’s effectiveness.
Install the machine with a water connection pipe according to the pipeline installation diagram. Position the main condensate pipeline slightly lower than the machine to facilitate drainage and prevent backflow.
Equip the inlet and outlet pipes with soft joints and valves to facilitate water flow adjustment and maintenance. Install a filter valve on the water inlet pipe to filter impurities and avoid blockage of the unit’s internal pipeline.
Ensure the effective diameter of the inlet and return pipes is greater than the inner diameter of the machine interface.
Provide power supply for the unit: AC190~250v, 50/60Hz. Ensure the voltage is within a safe range, and install a safety grounding wire on the shell of the unit.
When using the condensate drain pipe, ensure the correct installation method of the machine and the drain pipe.

Recommend Products